阳江附近想过夜电话联系

Guosheng machinery > Product Center > Feeder equipment >
 GZL drawing machine vibration

GZL drawing machine vibration

Hot sale

[feed size]: ≤500mm

[production capacity]: ≤1800t/h

[application scope]: Widely used in metallurgy, building materials, coal, chemical industry, light industry and other industries

[product introduction]: Xzgzl vibrating ore drawing machine has a long service life. It can be widely used in metallurgy, building materials, coal, chemical industry, light industry and other industries. It is a new type of feeding equipment with advanced technology. The equipment can be divided into two types: seat xzgzl vibrating ore drawing machine and suspended xzgzl Vibrating Ore Drawing Machine (deep groove type)

Sales Hotline: 0373-5419909

Product introduction

Xzgzl vibrating ore drawing machine has a long service life. It can be widely used in metallurgy, building materials, coal, chemical industry, light industry and other industries. It is a new type of feeding equipment with advanced technology. The equipment can be divided into two types: seat xzgzl vibrating ore drawing machine and suspended xzgzl Vibrating Ore Drawing Machine (deep groove type). For different materials such as block, granular and powder, the equipment can realize continuous, uniform and automatic feeding, so it is called the ideal equipment for discharging, feeding or loading crops.
 
 Xzgzl Vibrating Ore Drawing Machine
 
The feeding capacity of xzgzl vibrating ore drawing machine is large, which has been increased from 1000 tons / hour to 2000 tons / hour now, and the feeding particle size has also reached 800-1000mm. It can be matched with frequency converter to achieve the purpose of adjusting feeding amount and automatic control. When the equipment is in the state of near resonance during operation, it can avoid the tank body bearing excessive vibration and the transmission part bearing too large excitation force, which can remove the factors that may burn the motor due to venting or ore sticking.
 
 XZG coal feeder

Product features

1. The amplitude frequency and the groove inclination angle are adjustable, and the width, length and motor power of the trough can also be adjusted according to the actual use. There are nearly 20 models for wide selection.
2. The installation mode has strong adaptability, including hanging type, seat type or combination type. If it is through the suspension device, the equipment can be installed at the lower part of the silo, and a feeding and drawing system can be formed through the matching hopper. The hopper can also be equipped with appropriate gate according to the requirements, which is not only convenient for adjusting the material flow, but also convenient for closing the hopper when replacing and maintaining the feeder.
3. Ordinary, explosion-proof, 380V, 660V vibration motors can be selected to match with frequency converter to achieve remote centralized control, realize frequency conversion feeding and batching, remote microcomputer operation and control, no maintenance is required all year round, and it is convenient for modern management.
4. The machine has uniform force, stable and reliable operation, large amplitude, low power consumption, uniform feeding, large processing capacity, low noise, and trouble free operation for more than 2 years.
5. When feeding, the machine can meet the requirements of long-term continuous or intermittent operation (the motor adopts continuous working system or intermittent working system). The machine needs small excitation force, small impact, stable operation, stable amplitude, fast start, quick stop and small maintenance workload.
6. The motor capacity required by the equipment is small. A single vibration motor can start steadily under constant voltage, and is not affected by the load and jamming of tank materials. The electric energy consumption is small, and the motor is not easy to burn out in long-term use, and the operation is convenient.
7. The design structure is reasonable and compact, which can achieve reasonable sealing. There is no leakage and sprinkling during feeding, and there is little dust after sealing.
8. The vibration exciter has good integrity, without any external coupling accessories, mass bearing and connecting groove.
 
 XZG resonance vibration feeder

working principle

Xzgzl vibrating ore drawing machine takes vibration motor as power source and adopts double mass near resonance inertial vibration principle. The main vibration part is the excitation part. A vibration motor is installed on the vertical plate behind the balance body. The centrifugal force generated by the eccentric blocks installed at both ends of the main shaft of the vibration motor is used to obtain the exciting force, which drives the table surface of the vibration drawing machine and the material to make periodic linear reciprocating vibration. The eccentric force of the vibration motor is controlled by the shear rubber block fixed on the balance body and pressure plate The force shear is transferred to the tank body. When the vibration acceleration of the ore drawing body is vertical greater than the gravity acceleration, the materials in the body are thrown up and jump forward according to the trajectory of parabola, and the throwing and falling are completed in an instant. Due to the continuous vibration of the vibration motor, the ore drawing body also vibrates continuously, and the materials in the body jump forward continuously, so as to achieve the purpose of ore drawing and ore conveying and realize uniform feeding.
 
 Suspended Vibrating Ore Drawing Machine

technical parameter

model Tank size (width × length × height) mm Productivity T / h Feed size mm Vibration times Double amplitude mm Voltage V Power kw
XZGZL1 200×600×100 ten fifty one thousand two 380-660 zero point two
XZGZL2 300×800×120 twenty fifty one thousand two point five 380-660 zero point two
XZGZL3 400×900×150 fifty seventy one thousand two point five 380-660 zero point two
XZGZL4 500×1100×200 one hundred one hundred one thousand three 380-660 zero point four five
XZGZL5 700×1200×250 one hundred and fifty one hundred and fifty one thousand three point five 380-660 zero point seven five
XZGZL6 900×1600×250 four hundred two hundred one thousand three point five 380-660 one point five
XZGZL7 1100×1800×250 six hundred two hundred and fifty one thousand four 380-660 two point two
XZGZL8 1300×2200×30 eight hundred and fifty three hundred and fifty one thousand four 380-660 five point five
XZGZL9 1500×2400×375 one thousand and one hundred five hundred one thousand five 380-660 seven point five
XZGZL10 1800×2500×3750 one thousand and five hundred five hundred one thousand five 380-660 ten
XZGZL11 2000×2800×375 one thousand and eight hundred five hundred nine hundred and sixty 8-11 380-660 eleven

Remarks: 1. Vibration feeder and feeding hopper can be ordered separately according to the demand.
2. The 11 models in the above table are basic models, which can be updated and designed according to the production needs.
 
 XZG double mass resonance vibration feeder

structural style

 XZG vibrating drawing machine
 
Scope of application
 
 XZG suspended Vibrating Ore Drawing Machine

Test run

1. Before starting the machine, carefully check whether the screws of the vibration motor, motor base, bearing and other parts of the equipment are loose. If they are loose, they should be tightened in place immediately.
2. Secondly, the equipment bearing should be filled with qualified lubricating oil, and the oil quantity should be sufficient.
3. The next step is to check whether the frame of the ore body is cracked and deformed, especially its wear degree. If it is serious, it should be repaired or replaced in time. It is also necessary to check whether the support frame of the equipment is firmly connected and whether there is falling settlement.
4. Finally, it is necessary to check whether the interlocking parts of the equipment and other equipment are reliable, so as to avoid affecting the overall ore yield of the equipment.
 
 XZG dual body ore drawing feeder

Customer case

  Dzsf heavy duty high efficiency motor vibrating screen
Dzsf heavy duty high efficiency motor vibrating screen

Processing materials:

throughput:

Equipment configuration: One dzsf1850-3p vibrating screen and three TD75 belt conveyors

View details
 Herringbone nylon antiskid belt conveyor
Herringbone nylon antiskid belt conveyor

Processing materials: resin

throughput: 15t/h

Equipment configuration: Six herringbone nylon antiskid belt conveyor

View details

Recommended products



Xinxiang Guosheng Machinery Equipment Co., Ltd Yu ICP Bei 14028944-2 Address: west exit of Xinxiang Changji Expressway

Online consultation
Ask for a quotation
Sales Hotline

Sales Hotline: 13569819530