阳江附近想过夜电话联系

Guosheng machinery > Product Center > Mining screening and conveying equipment >
 TD75 belt conveyor

TD75 belt conveyor

Hot sale

[feed size]: ≤400mm

[production capacity]: ≤800t/h

[application scope]: It is widely used in metallurgy, mining, coal, port, transportation, hydropower, chemical industry and other departments

[product introduction]: TD75 belt conveyor has the advantages of large conveying capacity, simple structure, convenient maintenance, low cost and strong versatility. The material block size allowed by the equipment mainly depends on the belt width, belt speed, slot angle and inclination angle, and also depends on the frequency of large materials

Sales Hotline: 0373-5419909

Product introduction

TD75 belt conveyor is widely used in metallurgy, mining, coal, port, transportation, water and electricity, chemical industry and other departments for loading, loading, transshipment or stacking of various bulk materials or finished articles with a loose density of 500 ~ 2500kg / m3 at normal temperature. The equipment has the advantages of large conveying capacity, simple structure, convenient maintenance, low cost and strong versatility. The belt conveyor is transported by single or multi unit synthetic transportation system. According to the process requirements, it can be arranged in horizontal or inclined form. In addition to meeting the requirements of horizontal or inclined conveying, the belt conveyor can also use the combination of convex arc section, concave arc section and straight line section The block size of materials allowed to be transported by belt conveyor mainly depends on the belt width, belt speed, slot angle and inclination angle, and also depends on the frequency of large pieces of material. At present, the working environment temperature of the belt conveyor is generally - 25 ~ + 40 ℃. In addition, Guosheng machinery also produces TD75 light belt conveyor, which can be customized according to the user's use occasion.
 
 TD75 belt conveyor

Product advantages

1. Strong conveying capacity and long conveying distance
Simple structure and easy maintenance
3. Low cost and strong versatility
4. The conveying is stable and there is no relative movement between the material and the conveyor belt, which can avoid the damage to the conveying material
5. Realize programmed control and automatic operation


 Xinxiang TD75 belt conveyor
 
Selection of diameter of turning drum

Used to change the direction of the drum and to change the direction of the drum. TD75 type turning drum can't be used as head discharge turning drum. According to the diameter of the driving drum and the use position of the turning drum, please select the diameter of the reversing drum according to the chart. All rollers are fixed on the frame with integral rolling bearing seat.

Width (mm) Drive drum diameter (mm) Diameter of reversing drum (mm)
≈180° ≈90° <45°
five hundred five hundred four hundred three hundred and twenty three hundred and twenty
six hundred and fifty five hundred four hundred four hundred three hundred and twenty
six hundred and thirty five hundred
eight hundred five hundred four hundred four hundred three hundred and twenty
six hundred and thirty five hundred
eight hundred six hundred and thirty
one thousand six hundred and thirty five hundred five hundred four hundred
eight hundred six hundred and thirty
one thousand eight hundred
one thousand and two hundred six hundred and thirty five hundred five hundred four hundred
eight hundred six hundred and thirty
one thousand eight hundred six hundred and thirty
one thousand two hundred and fifty one thousand
one thousand and four hundred eight hundred six hundred and thirty five hundred four hundred
one thousand eight hundred
one thousand two hundred and fifty one thousand six hundred and thirty
one thousand and four hundred one thousand two hundred and fifty

Note: the working conditions of the above power estimation are normal humidity, horizontal belt speed of 1.25-2.0m/s, material capacity of 1t / m3, dynamic stacking angle of 30 °, one empty section sweeper, one spring sweeper and one guide groove, and acceleration resistance factor is considered. The power of each plough unloader is about B500: 0.3kw; b650: 0.35kw; B800: 0.45KW.

 TD75 belt conveyor

working principle

TD75 belt conveyor is mainly composed of two end rollers and a closed conveyor belt which is tightly sheathed. The drum that drives the conveyor belt to rotate is called the drive drum (drive drum); the other drum that only changes the direction of the conveyor belt movement is called the change direction drum. The driving drum is driven by a motor through a reducer, and the conveyor belt is driven by the friction between the driving drum and the conveyor belt. The driving drum is generally installed at the unloading end to increase the traction force and facilitate the dragging. The material is fed by the feeding end, falls on the rotating conveyor belt, and is transported to the discharge end by the friction of the conveyor belt.

 TD75 general fixed belt conveyor

technical parameter

Belt width
(mm)
Conveying length (m)
Power (kw)
Conveying speed
(m/s)
Conveying capacity
(t/h)
five hundred ≤12
three
12-20
4-5.5
20-30
5.5-7.5
1.3-1.6 78-191
six hundred and fifty ≤12
four
12-20
seven point five
20-30
7.5-11
1.3-1.6 131-323
eight hundred ≤6
four
ten
seven point five
15-30
7.5-15
1.3-1.6 278-546
one thousand ≤10
five point five
10-20
7.5-11
20-40
11-22
1.3-2.0 435-853
one thousand and two hundred ≤10
seven point five
10-20
eleven
20-40
15-30
1.3-2.0 655-1284
one thousand and four hundred ≤10
eleven
<10-20
eighteen point five
<20-40
22-37
1.3-2.0 893-1745
one thousand and six hundred ≤10
fifteen
<10-20
twenty-two
<20-40
30-45
1.3-2.0 1069-2195
Note:
1. The transport capacity in the table is calculated under the conditions of material bulk density Q (T / s), horizontal transportation and roller groove angle of 30 °.
2. Dt.di series belt conveyor is suitable for conveying all kinds of bulk and granular materials with bulk density less than 1.2t/m3, and can also be used to transport bulk materials with bulk density of 0.8-2.5t/m3, as well as finished products.

 General purpose belt conveyor

product mix

1. Drive part: it is composed of motor, high-speed coupling, reducer and reducer coupling installed on the base welded with section steel. According to the layout requirements: there are two kinds of drive device: left mounted and right mounted. In addition, the company is equipped with oil cooled electric roller with power of 1.5KW to 13kw and speed of 0.80, 1.0 and 1.25.
2. Rolling part: it can be divided into two categories: driving drum and changing drum.
3. Idler part: groove shape, parallel, centering and buffer idler, etc.
4. Cleaning part: Spring sweeper and empty section cleaner.
5. Unloading part: divided into fixed plough type unloader and electric unloader.
6. Brake part: there are belt backstop and roller backstop.
7. Accessories: in cover, guide groove, funnel, etc.


 Manufacturer of TD75 belt conveyor
 
Layout form

 TD75 belt conveyor schematic diagram
 
Outline drawing

 Outline drawing of TD75 belt conveyor

Operation and maintenance

1. Under normal conditions, TD75 belt conveyor requires no-load start, and avoid frequent start-up for a short time.
2. Always check the reducer for oil leakage, and regularly check whether the oil charge is appropriate, and supplement it in time.
3. Keep the surrounding area of the belt conveyor, especially the driving device, clean up the pulverized coal and sundries on and around the belt conveyor in time to avoid affecting the normal operation.
4. The idlers with inflexible rotation should be replaced and repaired in time.
5. The driving drum should be kept clean, and the adhesion and moisture should be removed in time.
6. If the belt deviation is found, it should be adjusted in time, and it is not allowed to wear the belt edge.
7. The adhesive tape joint shall be inspected frequently, and the damage shall be repaired in time to prevent water from penetrating into the core of the tape.
8. The loading point should be checked frequently to prevent the large materials or foreign matters from damaging or blocking the outlet and tearing the tape.

 Model of TD75 belt conveyor
 
Operating procedures

1. Turn on the main power switch and check whether the power supply of the equipment is normal and whether the power indicator is on. Carry out the next operation after normal operation.
2. Turn on the power switch of each circuit and check whether it is normal. Under normal conditions: the equipment does not act, the belt conveyor running indicator light is not on, the power indicator light of frequency converter and other equipment is on, and the display panel of frequency converter shows normal (no fault code display).
Start up the electrical equipment according to the normal speed or start the next electrical equipment according to the normal process.
be careful:
First of all, in the operation of TD75 belt conveyor, it is necessary to abide by the provisions of the articles to be transported in the design and the design capacity of the belt conveyor.
Secondly, the operator should not touch the electric parts of the machine.
Finally, during the operation of the belt conveyor, it is not allowed to open the rear stage of the frequency converter. If the maintenance needs to be determined, it must be carried out when the frequency conversion operation is stopped, otherwise the frequency converter may be damaged. When the equipment stops running, press the stop button, and the main power supply can be cut off after the whole system stops.


 Belt conveyor installation

Customer case

  Heavy duty motor dzsf high efficiency vibrating screen
Heavy duty motor dzsf high efficiency vibrating screen

Processing materials:

throughput:

Equipment configuration: One dzsf1850-3p vibrating screen and three TD75 belt conveyors

View details
 Herringbone nylon antiskid belt conveyor
Herringbone nylon antiskid belt conveyor

Processing materials: resin

throughput: 15t/h

Equipment configuration: Six herringbone nylon antiskid belt conveyor

View details

Recommended products



Xinxiang Guosheng Machinery Equipment Co., Ltd Yu ICP Bei 14028944-2 Address: west exit of Xinxiang Changji Expressway

Online consultation
Ask for a quotation
Sales Hotline

Sales Hotline: 13569819530