阳江附近想过夜电话联系

 Xinxiang Guosheng Machinery Equipment Co., Ltd
Guosheng machinery > News Center > technical knowledge >

How to operate stainless steel vibrating screen safely

If you are looking for related products or have any other questions, you can call our sales hotline at any time, or click the button below to inquire about the quotation online!

National unified sales hotline: 0373-5419909
1. Clean the materials on the screen before starting the screen machine
Before starting the screen, check whether there is any residual material on the screen or the stainless steel screen is damaged. After cleaning and checking, the screen machine can be started.
 Stainless steel vibrating screen cleaning
2. After starting the screen machine, observe that the operation is normal
After the stainless steel vibrating screen is started, it is necessary to pay attention to the temperature of the vibration motor and whether there is abnormal noise during the operation of the screen machine. If there are hidden dangers endangering the equipment and personal safety, the production must be stopped in time. At the same time, the maintenance and adjustment must be carried out under the condition that the screen machine is completely powered off.
 Efficiency of stainless steel vibrating screen
3. Feeding must be even without impact
The stainless steel vibrating screen should be evenly distributed when feeding, so as to prevent the materials from piling up on the screen surface and affecting the screening efficiency. At the same time, it also prevents the screen from being damaged by excessive impact force.
 Maintenance of stainless steel vibrating screen
4. Check the bearing temperature 4 hours after starting
The bearing temperature of stainless steel vibrating screen needs to be measured 4 hours after starting. If the bearing temperature exceeds 75 ° it will cause the vibration motor to heat up, which will reduce the service life of bearing and vibration motor, and also lead to the whole screen machine running under load. When the bearing temperature is too high, it is necessary to stop the machine for rest before starting.
 Stainless steel vibrating screen equipment
5. Stop feeding when the screen is stopped
The feeding of stainless steel vibrating screen should be stopped when the screening is finished. After the materials on the screen surface are discharged, the machine should be shut down and the residue on the screen surface and inside the screen box should be cleaned in time to prevent materials from blocking the screen or other parts from affecting the next use.
 Price of stainless steel vibrating screen


Xinxiang Guosheng Machinery Equipment Co., Ltd Yu ICP Bei 14028944-2 Xindi, the exit of Jixi Expressway

Online consultation
Ask for a quotation
Sales Hotline

Sales Hotline: 13569819530